The 956A autoranging digital multimeter is a versatile unit that can, in addition to the standard multimeter functions, also measure temperature and perform diode and transistor hFE tests. The meter comes complete with PP3 battery, test leads, K-type termperature probe, multi-function socket and full instruction manual.
Secondary injected rubber moulded case
Autoranging on all functions
Auto and manual selectable
3½ digits bright backlit LCD with a maximum reading of 1999
Accurate, high resolution LCD
Measures temperature
Data hold and maximum data hold
Automatic shut off fifteen minutes after no use
Support stand
Backlight
Suitable for students, labs, home use and outdoors
Size: 150 x 70 x 50mm
Weight: Approx. 240g (including battery)
Designed to International Safety Standards IEC1010-1, CAT III 600V and Pollution 2
Q. Please can you tell me which replacment fuse I need to order whilst prepering the order.
A. Hi Graham. Thank you for your question. The fuse required for a 85-0725 is 26-2471 and 26-2483.
Reviews
Great value for money
Reviewed by: Paul Grenfell - 24 February 2014
Great for hobbyist use. I was going to buy the slightly cheaper manual Rapid Multimeter but decided to spend a few extra pounds on this auto-ranging model instead. As another reviewer mentioned - you'll probably want to get a better set of leads for it. The ones that come with it are fine but you'll outgrow them. The manual is quite badly translated so if you're an absolute beginner you will probably need guidance from elsewhere, but if you've ever used a multimeter before you won't need the instructions.
Good For The Money
Reviewed by: David Valentine - 06 February 2014
Just bought a few of these general bench use. You know the sort of requirement. You want a meter that will measure most things with reasonable accuracy, but cheap enough that you don't mind too much if you break it. So far (couple of days) they are looking good. The electric field detection means you just wave the meter next to a mains lead and you know it is live. The supplied thermocouple means you can quickly and easily check component and heatsink temperatures. Oh yes. It measures volts ohms and amps as well. The leads are basic, as expected for a low cost meter. But you can easily upgrade these to suit individual preferences.