Heavy-duty high output transformer and forced-air cooling to maximize duty cycle performance. Supplied with comfort grip non-live torch, 1.8m earth cable, 1m gas hose, 0.45kg flux cored wire and 1mm contact tip. Set up in the no-gas welding mode, but can also easily be switched to gas by simple change of polarity and the purchase of a Gas Conversion Kit - Model No. 120.802032.
Model No
MIGHTYMIG150
Nett Weight:
26kg
Welding Current:
30-150A
Wire Capacity:
0.9kg Gasless & 0.7kg Mild Steel
Duty Cycle:
100% @ 30A, 15% @ 105A
Cooling System:
Forced Air
Gas Type:
CO2, Argon, CO2/Argon Mix
Torch:
2.1m Non-Live
Supply:
230V
Absorbed Power:
4.5kW
Case Size:
Compact
Weight:
26kg
Gasless Consumables:
Flux Cored Wire (0.9kg x Ø0.9mm):
TG100/1
Replacement Tips 1mm (Pack of 5):
TG100/2
Note:
For use with 0.9kg Gasless and 0.7kg Mild Steel Wire Reels only.
A small welder that for occasional home use is fine. The inexperienced welder may find it hard to get the power low enough for thin sheet material but it can be done.
Manual not very helpful though.
Fitting wire has to be done with care it is easy to get the wire down the side of the liner and jam things up.
For general welding thicker stuff this works great if you keep within the duty cycle and don't try to do too much at once.