The HPS-16010 from Voltcraft's HPS series of high power DC bench power supplies is extremely compact at 200 x 90 x 215 mm, thanks to its primary switched mode technology. It has a full rated current range of 0A to 10A via the PSU's rear output, while its front output provides current limited to 5A.
Select from 4 operating modes: Normal, Preset, Remote Control and Set. In Normal mode, settings are made using the HPS-16010's front panel. In Preset mode, stored settings are used and the front panel becomes inactive. Set mode is used to programme the 3 presets using the front panel controls. In Remote Control mode, the power supply responds to external DC voltage signals to alter Voltage, Current, and Output On/Off.
- Digital double function adjustment control for coarse and fine control
- Overload protection
- Overheating protection
- Current limiting
- Temperature regulated unit fans
- Outputs: 1
- Max power: 600W
- Voltage setting range(s): 1V DC to 60V DC
- Current setting range(s): 0A to 10A
- High contrast digital LCD display for voltage and current
- 3 user-defined output presets
- Remote control via external DC voltage
- PSU Technology: Switched Mode
- Type: Bench
DC bench power supply · Power cable · Remote control plug connection · User manual.
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
1V |
Output Voltage Max. |
60V |
Output Current Min. |
0A |
Output Current Max. |
10A |
Power Rating |
600W |
Supply Voltage Range |
230V |
Temperature Range |
0 to +40°C |