A multi-ratio gearbox supplied in kit form.
| Supply Voltage | 1.5 to 3V |
|---|---|
| Current (Max Torque) | 1060mA |
| Current (No Load) | 300mA |
| Input Power (Max Torque) | 1.29W |
| Maximum Output Torque | 0.1Ncm |
| Speed (Max Torque) | 3700 to 4rpm |
| Speed (No Load) | 1860 to 2rpm |
Q. I have a large number of motors and so ideally I would just like to buy approx. 10 of the gearbox kits without the motors. Is this possible? The motors have a 2mm drive shaft.
A. Hi Peter, thank you for your question. Sorry we are only able to supply the gear box kit complete.
Q. Can the gear ratio be adjusted while the motor is running? e.g. without stopping its action? Also, when the ratio is 4:1, can we achieve for example 500 RPM?
A. Hi John, thank you for your question. The gear ration cannot be adjusted whilst in motion, to get around 500rpm you need a 16:1 ration at around 1.7V please see the data sheet for more information.
Q. Please can you give me the overall size of this motor.This motor is to fit inside a 1:76 /OO scale windmill the base is 88mm tapering to 50 mm and the gearing ratios would be good for the speed I require. Many Thanks Mr K R Harris
A. Hi Mr Harris. Thank you for your question. The overall dimensions of the motor are as follows:
Overall height: 38mm; body height: 25 mm x 20mm width.
