Blue self-stripping blade splice connector from TruConnect. The blade splice is crimped over the cable with pliers, a 6.3mm push-on blade can then be inserted into the female blade socket.
Q. I am proposing to connect 16/0.2 wire to a 32/0.2 bus wire using these crimp splices. Are they suitable for these wire sizes? if not what would you recommend please?
A. Hi Bruce, thank you for your question. 33-0160 would be the better option for this range of wires.
Q. I would like to purchase around 100 crimp blade splice connectors part number 330190 and would like to know if they come with the blade connectors as part of the pack, or are the blade connectors supplied seperately if so could you give me the part number please.
Regards
Bob Comber
A. Hi Robert, thank you for your question. Any of the 6.35mm versions can be used: 33-0285, 33-1057 or 33-1058.
Reviews
crimp blade slicers
Reviewed by: railway modeler - 22 July 2014
an easy to use product, once found on the web page, only found after another modeler used them on a u-tube post
great little splice
Reviewed by: M - 28 May 2014
Bought these to replace the useless system connectors on a set of decking lights. they are easy to use and of good quality
