This LappKabel ÖLFLEX® Classic 100 CY Power and Control Cable is flexible and ideal for fixed installation and medium mechanical use. It can be used in dry, damp and wet rooms.
The cable conductor has been manufactured from fine strand bare copper wire, shielded against electrical interference with a transparent outer sheath. The Classic 100 can only be installed outdoors as long as it is enclosed and protected from Ultra Violet.
At room temperature, it is generally resistant against acids, caustics solutions and certain oils. The cable can be used for machine tool manufacture, plant engineering, in power stations, in heating and air conditioning installations, etc.
- Ideal for: Plant engineering Industrial machinery
- Heating and air-conditioning systems
- Conveyor and transport systems
- In EMC-sensitive environments(electromagnetic compatibility)
- Space-saving installation due to small cable diameters
- High electrical performance due to 4 kV test voltage
- Based on IEC 60227-5 and EN 50525-2-51
- Flame-retardant according IEC 60332-1-2
- Good chemical resistance, see catalogue appendix T1
- High degree of screeninglow transfer impedance (max. 250Ω/km at 30MHz)
- Type: ÖLFLEX® CLASSIC 100 CY 3x 2.5
- Manufacturer's part: LappKabel 0035001
This cable will be supplied in one continuous length, subject to the maximum reel size. For example, an order for 7 metres of cable will result in a single 7-metre cable being supplied, not 7 one-metre lengths.
| Number of Cores |
3 |
| Colour |
Transparent |
| Cable Diameter |
11.8mm |
| Wire Size |
2.5mm² |
| Weight |
N/A |
| Voltage Rating |
750V |
