Curing time: 180sec
Structural applications, high temperature and moisture resistance, gap filling
Curing time: 3-10sec
Universal, low viscosity
Curing time: 10-20sec
High resistance to impact and shockloads, good resistance in humid environments
Toughened, black, fast
Curing time: 2-10sec
Rapid bonding of plastics, rubbers including EPDM, and elastomers
Curing time: 2-5sec
Suitable for plastics and rubber
For bonding materials subjected to bending or distortion, as well as flexible components
Flexible, bendable, high viscosity
Fixture times: Steel-15 min, Brass-8 min, Stainless Steel-360 min
Low strength, general purpose
Fixture times: Steel-25 min, Brass-20 min, Stainless Steel-210 min
Low strength, low viscosity, small threads
Fixture times: Steel-40 min
High strength, high temperature resistant
Fixture times: Steel-10 min, Brass-10 min, Stainless Steel-150 min
High strength, general purpose
Fixture times: Steel-20 min, Brass-20 min, Stainless Steel-60 min
Medium/high strength, wicking grade
Fixture time: 75 min
Fixture time: 180 min
Fixture time: 15 min
Skin formation time: 5 min
General purpose 1-component silicone, Clear colour, Suitable for glass, metal, ceramics, etc.
Ideal for use on rigid flanges where high temperature and chemical resistance is necessary
Ideal for use on rigid iron steel and aluminium flanges
Replacement for cork and paper cut gaskets on flanges and stamped, sheet metal covers, Ideal for use where high vibration or flexing occurs, Can be used with plastic and painted parts
Ideal for use on rigid metal parts, e.g.cast iron components and pump housings
Leading in health and safety: No hazard symbols, risk or safety phrases, Excellent chemical and thermal resistance of cured product, White Material Safety Data Sheet – no entries in sections 2, 3, 15 and 16 of MSDS
Fixturing time: 12 sec
For stress-sensitive plastics
Fixturing time: 2 sec
High plastic adhesion, low intensity cure
UV-light curing acrylic, Low yellowing in sunlight environment, For bonding glass, plastics, metals, etc.
Handling strength after 3 min
Increased temperature resistance, Ideal for retaining of parts with a clearance or interference fit, i.e.retaining bushes, bearings, seals, fans, and liners
Handling strength after 4 min
Best resistance to dynamic, axial and radial loads, Ideal for shafts, gears, pulleys and similar cylindrical parts
Handling strength after 15 min
Ideal for repairing worn coaxial parts without remachining, Enables re - use of worn bearing seats, keys, splines or tapers, Suitable for retaining shims
Handling strength after 10 min
Leading in health and safety, No hazard symbols, risk or safety phrases, White Material Safety Data Sheet(no entries in sections 2, 3, 15 and 16 of MSDS), Good thermal resistance