The Siemens 6EP1336-3AA00 is a DIN Rail Compact DC/DC Converter that enables a cost effective network failure concept at the DC link of frequency controlled drive systems. The 20A switching power supply uses the kinetic energy of decelerating motors to buffer the 24V supply until the machine has completed a controlled shutdown. Its high efficiency ensures an extremely effective use of the energy reserve.
And because the available charge of capacitors is voltage-dependent, the wide input voltage range enables particularly high energy generation. In addition to capacitors, batteries are ideally suited as a DC source. The high degree of overload capability, functionality, and robustness of the DIN rail device permit its use in many applications, even under harsh conditions.
DIN Rail mountableWide-range input for 200 to 900V DCHigh energy generation from capacitorsHigh degree of efficiency up to 96%Robust and compact design with only 90mm width50% extra power for connection of loads with high current demandIntegrated signalling contact 24V DC OK3 LEDs for different operating statesAdjustable start up delay, e.g. for operation at the DC link of SINAMICS frequency convertersWide temperature range from -25°C to +70°CHigh shock and vibration resistanceExpandable with the following add-on modules: redundancy module, selectivity module and DC UPSManufacturer's part: Siemens 6EP1536-3AA00 SITOP PSU100M
| Input Voltage |
200 - 900 DC |
| Output Voltage |
24V |
| Output Current |
20 |
| No. of Outputs |
2 |
