+44 (0)1206 751166  
 

Murata Low Current Radial Lead Inductors


This series of miniature radial lead small outline inductors are ideally suited to power decoupling, low power switching regulators, LF tuned circuits and general applications. Open wound ferrite bobbin insulated overall with flame retardant sleeving.

  • Lead pitch 3mm
  • Height 11mm
  • Diameter 6.5mm
  • Lead length 25mm


 
LRdcImaxOrder code
10µH0.07Ω1.5A88-1600
22µH0.11Ω1.0A88-1610
33µH0.15Ω0.92A88-1615
47µH0.28Ω0.78A88-1620
68µH0.30Ω0.77A88-1625
100µH0.50Ω0.66A88-1630
150µH0.54Ω0.52A88-1635
220µH1.05Ω0.44A88-1640
470µH1.87Ω0.31A88-1650
1.0mH3.50Ω0.17A88-1660
4.7mH12.0Ω0.09A88-1674
10.0mH30.0Ω0.07A88-1676
33.0mH95.0Ω0.04A88-1682
47.0mH115.0Ω0.03A88-1684
68.0mH220.0Ω0.02A88-1686
Question by Charlie | Product code: 88-1660
18 February 2013

Q I have read your answer to my question on the inductor marked 105C and it does not help.... the 105C is a 1mH inductor, that means that the code must 10 x 10^5 NANO henries However, the inductors marked 106 are 100uH so they are using 10 x10^6 WHAT ? It cannot be NANO. We have been pondering in the office and wonder if a 22uH inductor would have a code of 227 ? If it does, the code reads as first two digits give HUNDREDS then the next is the NEGATIVE power. Which seems nuts.
A Hi Charlie. Thank you for your question. The designation code does follow the usual protocol - but admittedly the use of mH (millihenry) is confusing.

Question by charlie | Product code: 88-1660
15 February 2013

Q Why does this range have its own coding? All other inductors use the code digit, digit, multiplier IN UH
A Hi Charlie. Thank you for your question. This range does have its own coding - the 22R is the series - then the 105 indicates the value by the usual system. For some reason they have been described in milli Henry (mH) rather than a higher equivalent value in micro Henry (uH) but both are the same.


loading