We’ve all been there. Trying to fill a gap inside the house or an exterior wall with liquid sealant and a caulking gun. In no time there is sealant everywhere it shouldn’t be!
3M’s Extreme Sealing Tape makes all that a thing of the past – there is no drying time and no mess to clean up; just a translucent tape that is easy to apply, looks good and provides a watertight seal.
The tape sticks on contact to many metals and plastics, and conforms over screw heads, fasteners, seams, joints, holes and gaps to ensure a long lasting seal on a variety of substrates. The tape is translucent and can be painted so blends seamlessly with its surroundings. Not only does it bond to a variety of substrates, but adheres well to itself in order to maintain a consistent seal while creating overlapping joints.
There is nothing worse than a sealant or filler that is cracking or crumbling. Extreme Sealing Tape stays flexible through extremes of weather and temperature, compensates for thermal expansion and contraction and has outstanding environmental resistance.
There are many applications for Extreme Sealing Tape, but it is most commonly to be found in the following areas:
Here’s a step by step guide to applying 3M’s Extreme Sealing Tape:
Clean with a solution of 50:50 water and isopropyl alcohol and wipe dry. Surface priming is recommended after cleaning for maximum performance.
Sticks on contact exactly where you roll it. No drips, oozing or waiting.
Peel off the release liner.
Roll down with a soft roller to conform over contours, seam edges, rivets or screw heads.