Rapid Electronics - Elan USBscope50 1GS/s Digital storage oscilloscope

You are in :

Tools, Fasteners & Production Equipment > Test Equipment > Oscilloscopes > USBscope50 1GS/s Digital storage oscilloscope > USBSCOPE50 DSO RE

USBSCOPE50 DSO RE

Send page to a friend

Print this page

Enlarge image

Key Features

USB Interface
Comes complete with software
50MS/s 8-bit single shot sampling rate
1GS/s Equivalent time sampling
75MHz Analogue bandwidth
300V Input range with x10 probe
AC or DC coupling
Programmable input offset
Programmable trigger threshold and edge modes
3000-point sample depth with pre and post trigger
Three time and three voltage cursors
200mA Host power consumption, with support for suspend
Probe compensation output signal
Use as a stand-alone unit or stack with other units
Convenient small size – dimensions 75 x 31 x 17.5mm approx.
Input galvanically isolated from USB port to 300V Cat II

Product Attributes

Bandwidth	75MHz
Features	1GS/s Sample Rate, AC, DC and Ground Coupling, 1MR Input Impedance, 16pF Input Capacitance
Height	18mm
Length	75mm
Number of Channels	1
Operating Temperature Range	-10°C to +45°C
Power Source	5V 200mA USB Powered
Resolution	8bits
Screen Size	800 x 600mm
Sensitivity	30mV/div to 3V/div (1x), 300mV/div to 30V/div (10x)
Sweep Speed	1ns/div to 4S/div in 1, 2, 4 steps
Triggering Mode	Auto, Normal, Single
Type	Digital Storage
Weight	42g
Width	30mm

Product Description

This innovative device is a miniature PC based oscilloscope that features a maximum sampling rate of 1GS/s and a bandwidth of 75MHz.

Its small size, USB connectivity, PC based functionality and high performance deliver many user benefits, including ease of use, versatility and economy.

A feature of this unit, and with the other units in the Elan USB range, is the ability to be stacked together. This facility means that, for example, two USBscope50 units may be stacked together to create a dual channel oscilloscope that has channel to channel matching and concurrent triggering. Furthermore it is possible to stack together differing types of test equipment so that any combination of test requirements, e.g. a synchronised signal generator and oscilloscope, is achievable.

Relevant connectors to stack two units together are included with this unit. Should the need arise to stack together more than two units the stacking connector kit must be purchased, contact Rapid<