The ATP MS-128A is a Non Invasive Moisture Meter that is hand-held. It is a compact digital moisture meter with a metal spheroid sensor for fast and convenient readings of the moisture content. The ATP MS-128 measures wood and aggregate materials without damaging the surface of the material being tested.
The ATP MS-128A is the ideal instrument for checking the relative moisture condition of building elements such as solid walls and floors prior to more rigorous and time-consuming investigative procedures that may be required.
The ATP MS-128A is very simple to use by holding the instrument against the surface of the material under investigation. The relative moisture level is measured by radio frequency to a nominal depth of 10-20mm. There are no needles to mark the surface and the MS-128A is not adversely affected by moisture.
- Range based on 0 = completely dry and 100 = completely wet
- Suitable for wood, gypsum and cement-based materials
- Metal spheroid sensor
- Quickly indicates the moisture content of materials
- Works to a depth of between 20mm and 40mm
- Large 25mm hi-contrast LCD display with Backlight
- Data Hold freezes displayed measurements
- Min/max memory for measured values since power on
- Auto power Off
- Low battery indication
- Impact-resistant ABS case
- Supplied with battery
Measurement Range (Wood) |
0 - 100% |
Measurement Range (Building Materials) |
0 - 100% |
Accuracy (Wood) |
±2% |
Accuracy (Building Materials) |
±2% |
Contact Measurement |
Yes |
Contactless Measurement |
No |