Industry Schools FE/HE Site: Industry Site: Schools Site: FE/HE Site: Mobile
{{ SessionBasket.ItemCount }}
Total: {{CurrencyCode == 'EUR' ? '€' : CurrencyCode == 'USD' ? '$' : '£'}}{{ IncVat ? SessionBasket.GoodsTotalIncVat : SessionBasket.GoodsTotalText }} Basket is empty.
Sign In/Register

  • Suggested Queries


RVFM KB-2150 GC Copper Clad Single Sided FR2 Synthetic Resin Paper 203 x 305mm

Order Code:  

34-0868

  Copy to clipboard
1 review
Brand: RVFM  Copy to clipboard MPN: KB-2150 GC  Copy to clipboard
 Report an error

Discontinued

Single-sided copper-clad printed circuit board, 203 x 305mm, made from SRBP - a paper-based material.


  • Excellent for low-cost printed circuit boards
  • Easier to drill than epoxy glass fibre
  • Results in longer life for drills and cutting tools
  • Suitable etchant ferric chloride solution
  • 35 Micron copper thickness
  • 150°C heat resistance
Board Material Synthetic resin bonded paper
Number of Sides 1
Length 203mm
Width 305mm

Questions


*Question functionality currently disabled


29 January 2013 Question by: Rapid Customer | Product code: 34-0868
Q. what is the max current rating for the board?
A. Hi Miss H. Thank you for your question. This can depend on the thickness and the size of the tracks on the board and also what type of board is being used.


27 November 2012 Question by: Rapid Customer | Product code: 34-0868
Q. What is the thickness please?
A. Hi Z Smith. Thank you for your question. The copper clad boards are approximately 1mm in thickness - the data sheet specifies between 0.8-1.6mm in thickness.

Reviews


great value copper clad boards

Reviewed by: Chris Holden - 19 May 2014
You can buy copper clad boards cheaply online on sites like ebay and alibaba. But by the time you've added in delivery costs (and import duty if you're unlucky enough to have it applied when the postie knocks on your door) it's not always so cheap. As it turns out, these boards are the cheapest I've found online in small quantities. And you don't have to wait 8 weeks for them to arrive! They're also very good quality; my batch arrived and - unlike some from other suppliers - the boards sit dead straight, not slightly curled, even after etching in warm ferric chloride. The cliche is you can only ever have any two of the following three: good quality, cheap price, fast delivery. These boards tick all three.