The Rapid HY3003D is a Digital Single Output Bench Power Supply. This is very stable, regulated output DC power supply allowing continuous adjustment of both the output voltage and current levels.
The Lab-Grade Power Supply has two LCD displays, allowing the output voltages and currents to be displayed simultaneously.
The voltage is variable from 0 to 30V; the current is also variable from 0 to 3A. The power supply is equipped with coarse and fine controls for adjusting the voltage and current outputs, making it extremely easy to set the output to your desired level.
Applications: Excellent for Schools, Universities, laboratory, science projects or any other use, where stable voltage up to 30V is required.
- 2 LCD displays
- Constant voltage and constant current
- Compact size
- Coarse and fine controls for both current and voltage outputs
- Input voltage: 110 to 220V AC/60Hz
- Line regulation: CV <= 0.01% + 1 mV, CC <= 0.2% + 1mA
- Load Regulation: CV <= 0.01% + 3mV, CC <= 0.2% + 3mA
- Ripple noise: CV <= 0.5 mV RMS, CC <= 3 mA RMS
- Protection: constant current and short-circuit protection
- LCD reading accuracy: ±1% for voltage and ±2% for current
- Environment: 0°C to +40°C, relative humidity < 90%
- Dimensions: 291 x 158 x 136mm
- Supplied with output current of 0 to 3A
- Supplied with an output voltage of 0 to 30V
- Manufacturer's part: Rapid HY3003D
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
30V |
Output Current Min. |
0A |
Output Current Max. |
3A |
Power Rating |
90W |
Supply Voltage Range |
104 to 220V |
Temperature Range |
0 to +40°C |