Rapid Electronics - 7041 40MHz 2-channel Oscilloscope with counter

You are in :

Tools, Fasteners & Production Equipment > Test Equipment > Oscilloscopes > 7041 40MHz 2-channel Oscilloscope with counter

7041 40MHz 2-channel Oscilloscope with counter

Enlarge image

Send page to a friend

Print this page

Contact an expert

All products by Rapid >

The 7041 is a 40MHz 2-channel oscilloscope with the added advantage of a 60MHz counter.

Outstanding value for money
40MHz bandwidth
High sensitivity
8 x 10cm rectangular screen with scale illumination
Delayed sweep time base
Component test facility
Excellent triggering facilities
Well presented front panel ensures quick and easy operation
Advanced CRT ensures a distinct bright trace even at high frequencies
X-Y mode allows Lissajous figures to be produced and phase shift to be measured
Very fast 10ns/div sweep rate make high speed risetime signals easily observable
Variable hold-off function
Output is available from channel 2 providing 50mV/div to drive external instruments
Features a 5-digit 9mm red LED display and measures from 0.1Hz to 60MHz with excellent resolution and accuracy
The carrying handle, which may be locked into any position, also doubles as a tilt stand
Supplied complete with mains lead and comprehensive instruction manual.
Probes not included, for suitable items see this section

The 7041 oscilloscope is available on a 14-day evaluation period. For further details contact sales.

View full technical specification

Review this Product : Click here

Share this page :

Order Here

Exc. VatInc. Vat

Unit of Sale

Description

Order Code

Qty

40MHZ DUAL CHANNEL SCOPE + COUNTER (RE)

85-2204

388.80

374.40

358.80

Add To Favourites

View Basket

Technical Specification

Show Hide

Vertical system
Sensitivity	5mV/div. to 5V/div. plus variable control
	1mV/div. to 1V/div. when x 5 magnification used
Accuracy	±3% (±5% with x5 mag)
Bandwidth	DC to 40MHz (–3dB)
Rise time	<8.8ns
Maximum input	400V (DC + AC peak)
Input impedance	1MΩ/25pF
Operating modes	CH1 or CH2, Dual trace, chop or alternate
Output signal	50mV/div. with 50Ω; load Channel 2 only
Horizontal system
Sweep speed	0.1µs/div.to 0.2s/div. plus variable control
Magnifier	x10 (extends sweep speed to 10ns/div.)
Accuracy	±3%
Hold-off	Variable control increases hold-off time by 5:1
Delayed sweep	0.1µs/div. to 0.2s/div. in calibrated steps
Trigger system
Modes	AUTO, NORM, TV-V and TV-H
Source	CH1, CH2, ALT, LINE, EXT
Polarity	+ or –
Trigger sensitivity
Coupling	Bandwidth	Internal	External
TV-V	DC-1kHz	1/div.	0.1V p-p
TV-H	1kHz-100kHz	1/div.	0.1V p-p
Auto	100Hz-40MHz	1.5/div.	0.1V p-p
Norm	100Hz-40MHz	1.5/div.	0.1V p-p
X-Y operation
X-Y mode	Selected by switch
Bandwidth	DC-1MHz (–3dB)
	Ch1-X axis, Ch2-Y axis
Accuracy	Y axis ±3%
	X axis ±6%
Phase shift	Less than 3° at DC-100kHz
Z-axis (intensity modulation)
Sensitivity	3V p-p TTL signal compatible
Bandwidth	DC to 5MHz (-3dB)
Impedance	5KΩ
Component test
Test voltage	6V rms max. (open circuit)
Test current	11mA max. (shorted)
Test frequency	Line frequency
Components	Capacitor, inductor, diode, transistor, etc
Counter
Display	5-digit 0.36in red LED
Gate time	auto select, auto detect, auto reset
Resolution	0.001Hz to 1kHz according to the frequency of the input signal, auto		select
Counter range	0.1Hz to 60MHz max
Accuracy	±0.01% +1 digit or 1/99999 +1 digit
Time base	18.432MHz ±10ppm (23°C ±5°C)
Sensitivity
Mode	Range	Sensitivity
INT	2Hz to 40MHz	>=1 DIV
	1Hz to 45MHz	>=2 DIV
	0.2Hz to 50MHz	>=3 DIV
EXT	10Hz to 50MHz	>=200mV rms
	1Hz to 60MHz	>=400mV rms
(note that the counter must be set to ‘DC Coupling’ operation when the input signal is less than 10Hz	Display
CRT	rectangular with integral graticle
Display area	8 x 10 div (1div = 1cm)
Accelerating voltage	2.1kV
Phosphor	P31
General
Calibration voltage	1kHz (nominal) positive square wave, 2.0V pk-pk
Power requirements	115, 230V AC 50/60Hz, 40W approx
Dimensions	324 x 132 x 398mm
Weight	7.8kg

Vote:*

Reviewed By:

Product being reviewed:*

Review:

* Required

Thank you for your review.

Your vote has now been counted

Your review will be added soon.

/tools