Rapid Electronics - 7025 25MHz Dual channel oscilloscope

You are in :

Tools, Fasteners & Production Equipment > Test Equipment > Oscilloscopes > 7025 25MHz Dual channel oscilloscope

7025 25MHz Dual channel oscilloscope

Enlarge image

Send page to a friend

Print this page

Contact an expert

All products by Rapid >

The 7025 is a 25MHz dual channel oscilloscope at an affordable price.

25MHz ALT trigger
1mV sensitivity
10ns resolution
Component test
Beam finder

The 7025 oscilloscope is available on a 14-day evaluation period. For further details contact sales.

View full technical specification

Review this Product : Click here

Share this page :

Order Here

Exc. VatInc. Vat

Unit of Sale

Description

Order Code

Qty

7025 25MHZ 2 CHANNEL SCOPE COMP TEST RE

85-2203

322.80

290.40

264.00

Add To Favourites

View Basket

Technical Specification

Show Hide

Vertical system
Sensitivity	5mV/div to 5V/div(X1mode), 1mV/div to 1V/div(X5 mode)
	1-2-5 sequence, 10 step attenuator.
	Vernier control provides full adjustable attenuation between steps.
Accuracy	±3% (X1 mode), ±5%(X5 mode)
Input resistance	1MΩ±2%
Input capacitance	25pF±10pF
Frequency response	5mV to 5V/div (CAL): DC to 25MHz (-3db) 1mV/div (CAL): Dc to 10MHz (-3db)
Rise time	Approx. 14.0ns
Operating modes	CH1: CH1, single trace. CH2: CH2, single trace. ALT: dual trace, alternating
	CHOP: dual trace, chopped. ADD: algebraic sum of CH1+CH2
Polarity reversal(invert)	CH2 only
Max. input voltage	400VDC+AC peak
Max. undistorted amplitude	DC to 25MHz: 4 divisions, DC to 15MHz: 8 divisions
Horizontal system (input through channel 1 input)
0X-Y mode	switch selectable using X-Y switch. CH1: x axis, CH2: y axis
Sensitivity	1mV/div to 5V/div
Accuracy	y axis: ±3%, x axis: ±6%
Input impedance	1mΩ/25pF
Frequency response	DC to 1MHz typical(-3db)
X-Y phase difference	Approx. 3° at 50kHz
Max. input voltage	400VDC+AC peak
Sweep system
Sweep speed	0.1µs/div to 2s/div in 1-2-5 sequence, 23 steps.
	Vernier control provides fully adjustable sweep time between steps.
Accuracy	±3%
Sweep magnification	10X, ±6% (0.1µs and 0.2µs ranges uncalibrated
	when X10 is engaged.
Hold off	Continuously adjustable from NORM to 5 times normal
Triggering
Trigger source	CH1, CH2, ALT, EXT, LINE
Max. external trigger voltage	300VDC+AC peak
Trigger coupling	AC: 30Hz to 30MHz, TV-H: used for triggering from horizontal sync pulses.
	TV-V: used for triggering from vertical sync pulses.
Trigger sensitivity	Internal: 0.5 division (1 division with TV coupling), External: 500mV.
Component test
Test voltage	Max. 6Vrms (open circuit)
Test current	Max. 11mA (shorted)
Test frequency	Line frequency
Components	Capacitor, Inductor, Diode, Transistor, Zener etc.
Beam finder	Trace can be returned to CRT centre area when beam finder button is pressed
Power requirements	115/230VAC ±10%, 50/60Hz
Dimensions	324 x 132 x 398mm
Weight	Approx. 7.6kg

Vote:*

Reviewed By:

Product being reviewed:*

Review:

* Required

Thank you for your review.

Your vote has now been counted

Your review will be added soon.

/tools