Rapid Electronics - TG210 2MHz Function generator

You are in :

Tools, Fasteners & Production Equipment > Test Equipment > Function Generator > TG210 2MHz Function generator

TG210 2MHz Function generator

Enlarge image

Send page to a friend

Print this page

Contact an expert

All products by Thurlby Thandar >

The TG210, designed and manufactured in the UK by Thurlby Thandar, is a state-of-the-art 2MHz function generator. Unlike many other products good waveform quality is maintained throughout the frequency range and at low output levels.

The instrument provides bi-directional variable symmetry at constant frequency from 1:9 to 9:1
Provides maximum output levels of 20V peak to peak from a 50Ω or 60Ω source
An amplitude vernier with a range of 40dB is combined with a –20dB switched attenuator to provide levels down to 20mV peak to peak
Variable DC offset of ±10V is available via a central detent control
An auxiliary output provides a fixed 0V to +5V level suitable for driving both TTL and CMOS loads
Each range can be swept by at least 1000:1 either manually or via the sweep control
Provides very high waveform quality under all conditions
Housed in robust ABS enclosure with an adjustable position stand
Supplied complete with mains lead and comprehensive instruction manual

View full technical specification

Review this Product : Click here

Share this page :

Order Here

Exc. VatInc. Vat

Unit of Sale

Description

Order Code

10+

Qty

TG210 2MHZ FUNCTION GENERATOR (RE)

85-1270

141.00

131.00

124.00

85-1270 will be available in < 1 week

Add To Favourites

View Basket

Technical Specification

Show Hide

Frequency
Frequency Range	0.002Hz to 2MHz in 7 overlapping decade ranges with fine		adjustment by a vernier
Vernier Range	1000:1 on each range
Vernier Accuracy	Typically ±5% of full scale
Sweep Mode
Input Impedance	10kΩ
Input Sensitivity	0 to 3V for 1000:1 sweep
Maximum Allowable Input Voltage	±10V
Sweep Linearity	Better than 1%
Maximum Slew Rate of Sweep Voltage	0.1V/µs
Operating Modes	Specifications apply for the top decade of each frequency range and output 10V peak-to-peak into 50Ω termination.
Sine
Distortion	Less than 0.5% on 200, 2K and 20K ranges; less than 1% on 2, 20
	and 200K ranges; all harmonics >25dB below fundamental on 2M	range
Amplitude Flatness	±0.2dB to 200kHz; 1dB to 2MHz
Triangle
Linearity	Better than 99% to 200kHz
Square Wave
Rise and Fall Times	<100ns
Mark - Space Ratio	1:1 ±1% to 100kHz
DC
Range	±10V from 50Ω
Symmetry
Symmetry Range	Variable typically between 1:9 to 9:1 (on top decade of each range), frequency divided by 10
Outputs
50Ω	Two switch-selectable ranges with 40dB vernier control within each range
0dB Range	0.2V to 20V peak-to-peak (0.1V to 10V into 50Ω)
–20dB Range	20mV to 2V peak-to-peak (10mV to 1V into 50Ω).
DC Offset	±10V from 50Ω. DC offset plus signal peak limited to ±10V
Control Range	(±V into 50Ω). DC offset plus waveform attenuated proportionally in –20dB position.
600Ω (not TG230)	Alternative output socket offering the same facilities as the 50Ω	socket.
TTL	Fixed 0 to +5V output capable of driving CMOS and 2 standard TTL loads
Sweep out	6V ramp from 600Ω
General
Power requirements
Input Voltage	110/120 volts AC nominal 50/60Hz or 220/240 volts AC nominal by	rear panel adjustment
Power Consumption	25VA max.
Environmental
Operating Temperature Range	+5°C to 40°C, 20% to 80% RH
Storage Temperature Range	–10°C to +65°C
Size	260(W)x88(H)x235(D)mm (10.2x3.4x9.2in), excluding handle and feet
Weight	1.9kg (4.2lb)

Vote:*

Reviewed By:

Product being reviewed:*

Review:

* Required

Thank you for your review.

Your vote has now been counted

Your review will be added soon.

/tools