Rapid Electronics - Auto-Temp 168 soldering station

You are in :

Tools, Fasteners & Production Equipment > Soldering Equipment > Soldering Stations > Auto-Temp 168 soldering station

Auto-Temp 168 soldering station

Enlarge image

Send page to a friend

Print this page

Contact an expert

All products by Xytronic >

The Auto-Temp 168 Soldering Station offers the ultimate in controlled temperature hand soldering. The nichrome element wire is precision wound at the end of the stainless steel barrel to ensure maximum temperature as close to the working surface of the tip as possible. The Auto-Temp incorporates electronic circuitry which enables the user to change the temperature at the tip from 150°C (300°F) through 450°C (850°F) without changing the tip or heating element. Dynamic response to soldering load variations is insured by the positioning of a unique sensor close to the tips working surface. The soldering tip is grounded through the power unit to ensure less than 0.5 millivolt or 0.03 microampere leakage.

Direct temperature readout analog displays available Temperature Stability
Spike free circuitry ‘Zero Voltage’ switching
Accuracy is mastered to within ±3°C (6°F)
Heat up time about 45 seconds
Rapid heat-up and instant heat recovery
Superior heat transmission
A standard temperature ‘Lockout’ feature prevents operators from altering preset temperatures
Fully grounded design safe on electro-sensitive devices
Station includes power supply, iron and stand with tip cleaner

A range of long-life, iron-plated soldering bits are available, please see order codes 85-0968 to 85-0978.