Based on the page you have landed on, we have selected the 'Electronics' website as your default.

If you would like to change your default sector, click the Change Product Range link above the Rapid logo.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Rapid website. However, if you would like to, you can change your cookie settings at any time.

Image Representative of range.

TruOpto High Intensity LED White (30000mcd) 5mm OSPW5111P

Order Code:


Qtyex VAT
ROHS Compliant

REACH Non-compliant

In stock, despatched same day

Key Features

Data Sheets

Buy High Intensity LED White (30000mcd) 5mm OSPW5111P from TruOpto - a high output LED in a 5mm package featuring a blade cathode which acts as a heat sink to dissipate heat at high current levels.

Incorporating the following features: 3.6V ultra high intensity (30,000mcd) deluxe white LED with a water clear lens, superior weather resistance, UV resistant epoxy. Suitable for automotive dashboard lighting and back lighting.

  • High luminous intensity for use in a wide range of indication and illumination applications requiring a high output
  • Manufactured using the latest technologies for long life, energy efficiency and high reliability
  • Suitable for PCB and panel mounting applications
  • Water clear lens

Technical Specification
REACH Certificate

Technical Specification

Only part of this technical specification is being displayed. Click here to expand
ColourWavelengthLum. int. (mcd)IFVFVFVRView
(nm)@ IF (30mA)max. (mA)typ. (V)max. (V)max. (V)angle
White0.30/0.31 *30000503.64.2515°
Warm white0.5/0.43 *28000503.44515°
* Chromaticity coordinates


Question by ian | Product code: 55-2484
7th May 2014

Qwhat button cell would I need to run these?
AHi Ian. Thank you for your question. Either 2 x any of the button cells or just 1 x coin cell will work with this LED.

Question by Keith Wright | Product code: 55-2484
12th November 2012

QWhat size resister is needed is series for 5v supply.
AHi Keith, Thanks for your question. This Led will use a 3.6V supply for ideal results – so 1.4V needs to “lost” across the resistor. Using 40mA as the current (80% of max) gives an ideal value of 35 Ohm, and a 0.125W power rating is more than adequate. The next highest resistor value is u39 Ohm in the 0.25W range. See our part:

Question by Eric Anderson | Product code: 55-2484
20th March 2012

QGreetings, What is the actual Color Temp (6500K, 12000K, etc.) of these LEDs? Thanks
AHi Eric, thanks for your question. The color temp is 10000K.


Be the first to submit a review