Rapid Electronics - RLink in-circuit debugger and programmer

You are in :

Electronic Components > Integrated Circuits > ST Microcontrollers > RLink in-circuit debugger and programmer

RLink in-circuit debugger and programmer

Enlarge image

Send page to a friend

Print this page

Contact an expert

All products by Raisonance >

The RLink (STX-RLINK) is a versatile, low-cost, in-circuit debugger and programmer for ST7, uPSD, STR7 and STR9 microcontrollers. It connects to application or evaluation boards for in-circuit programming and debugging via an industry standard JTAG connection for ARM core-based and uPSD microcontrollers, or via STMicroelectronic’s In-Circuit Communication (ICC) connection for ST7 microcontrollers. RLink is driven by Raisonance’s RIDE integrated development environment provides both in-circuit debugging and programming of applications for ST7 and uPSD, and in-circuit programming of STR7/9 microcontrollers. In combination with Raisonance’s free RFlasher programming software, RLink can be used as a very-low cost, dedicated in-circuit programmer for ST7, uPSD or STR7/9.

In-circuit debugging and programming
Connection to application board via JTAG standard, or ST standard ICC connection
USB interface to host PC
Powered from USB connection
Supplied complete with USB lead and RKit Developement Suite software on CD

Note: RLinks included with REva starter kits 73-4250 and 73-4254 allow debugging of both STR7 and STR9 microcontrollers.