|
|
|
|
|
These switch mode PSUs feature a case with fixing lugs, enabling them to be easily wall mounted. The performance specification and compact, rugged design of these units make them ideal for use in CCTV and other security applications as well as for general use as a SMPS.
- Available in 18W or 12W versions
- 12V DC fixed output
- Captive leads
- 2.1 x 5.5 x 12mm female barrel
- +ve centre polarity
- Low ripple and noise
- Short circuit, overcurrent and overvoltage protection
- EMI: Meets FCC class B, VCCI Class B, CISPR 22 Class B
- CE, cUL, TUV, PSE approved
|
 View full technical specification |
Average Customer Review :  Read Reviews here
|
|
Review this Product : Click here
|
Share this page :
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
| AC Input | | | | |
Voltage typ. | | 100 to 240V | | |
Frequency | | 50/60Hz | | |
Current max. | | 440mA | | |
Inrush current | | 50A | | |
Efficiency | | 75% | | |
Leakage current | | 0.25mA | | |
DC Output | | | | |
Voltage typ. | | 12V | | |
Voltage range | | 11.4 to 12.6V | | |
Load current max. | 85-3305 | 1.5A | | |
| 85-3306 | 1.0A | | |
Ripple | | 120mV | | |
Noise | | 240mV | | |
Hold-up time | | 10ms | | |
Turn-on delay | | 2s | | |
Overvoltage protection | | 19.5V | | |
Standby consumption | | 0.5W | | |
| | | | |
Dimensions L x W x H (mm) | | 92.2 x 49.8 x 26.3 | | |
Output barrel | | 2.1 x 5.5 x 12mm | | |
Operating temperature | | 0°C to +40°C | | |
Storage temperature | | –20°C to +65°C | | |
Weight | | 135g approx. | | |
|
|
|
|
|
|
Applies to product: 85-3305
|
Reviewed by James Gilbert
|
22 May 2008
|
|
This product is excellent quality and unbelievably small considering the 12vdc 1.5 amp regulated output. The integral mains lead means that it cannot be pulled out and the mounting lugs are really useful too
|
|
|