Rapid Electronics - Programmable DC regulated power supply

You are in :

Electrical & Power > Power Supplies > Bench PSUs > Programmable DC regulated power supply

Programmable DC regulated power supply

Enlarge image

Send page to a friend

Print this page

Contact an expert

All products by Rapid >

A series of linear mode power supplies that combine the low ripple, high precision output of laboratory graded linear regulated power supplies with full remote programming and data logging functionality.

Choice of DC voltage outputs – 18V, 30V and 60V
Linear mode for a high precision, low noise output
Typical applications include research and development, quality control and production - especially where there is a requirement for multiple power supplies with one centralised PC control
Excellent load and line regulation
Full remote programming and data logging
Built-in RS-485/RS232 interface enabling the control and data logging of up to 31 power supplies of different models of this series (requires an RS-232 to RS-485 adaptor available separately, please see below)
Using supplied software, up to 9 preset voltage and current limits and up to 20 sequential timed steps (100 steps can be stored on computer) may be programmed on the power supply or the PC
Command set and LabView™ driver enable users to integrate their own software with the power supply for full remote programming and data logging functions
Constant current and constant voltage modes with auto-cross over indication on front panel
4 digit LED high resolution ammeter and voltmeter with calibration facility
Tracking over voltage protection with user preset maximum output voltage
Supplied with user manual, 32-bit Windows control software. LabView™ driver, command set software, USB 1.0 driver, USB cable, RS-485 connector and 1x 120Ω resistor