Based on the page you have landed on, we have selected the Electronics website as your default.

If you would like to change your default sector, click the Change Product Range link above the Rapid logo.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Rapid website. However, if you would like to, you can change your cookie settings at any time.


HAMEG HMP2020 Programmable 2-Channel High-Performance Power Supply

The HMP2020 programmable 2-channel high-performance power supply from HAMEG is based on the classical transformer principle, utilising a high efficiency electronic preregulator and a secondary linear voltage regulator. This design concept stands for high output power, a compact sized housing and high efficiency, combined with smallest residual ripple.

There are 2-channels, each electrically insulated and combinable. The high resolution for set and read back values down to 1mV/0.1mA makes HMP an ideal solution for demanding applications. HAMEG Instruments are well known for oscilloscopes and test equipment for more than 50 years.

  • 188W Output power realised by intelligent power management
  • High setting - and read-back resolution of 1mV up to 0.1mA
  • Galvanically isolated, earth-free and short circuit protected output channels
  • Advanced parallel - and serial operation via V/I tracking
  • EasyArb Function for free definable V/I 
  • FuseLink: Individual channel combination of electronic fuses
  • Free adjustable Overvoltage Protection (OVP) for all outputs
  • All Parameters clearly displayed via LCD/illuminated buttons
  • Rear connectors for all channels including sense
  • USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB)

Product details Hints & Tips






Manufacturer’s Part Number: HMP2020

Hameg HMP2020 Prog 2 Channel High-Performance PSU


Despatched 2-3 weeks

Receive stock notification by text or 

Technical Specification

  Only part of this technical specification is being displayed.
Click here to expand

Display: 240 x 64 Pixel LCD (full graphical)
Memory settings: Non volatile memory for 3 Arbitrary functions and 10 device settings
Interface: Dual-Interface USB/RS-232 (HO720)
Processing time: <50ms
Protection class: Safety class I (EN61010-1)
Power supply: 115V to 230V ±10%; 50 to 60Hz, CAT II
Mains fuses: 5x 20mm slow blow
115V: 2x 6A
230V:2x 3.15A
Power consumption: 350VA max.
Operating temperature: +5°C to +40°C
Storage temperature: -20°C to +70°C
Rel. humidity: 5% to 80% (non condensing)
Dimensions:285(W) x 75(H) x 365(D)mm
Weight: approx. 8,5kg

For full technical specification and recommended accessories, see datasheet


Be the first to ask a question


Be the first to submit a review
< Power Supply Units

Bench Power Supply Units