*Question functionality currently disabled
26 May 2016 Question by: Rapid Customer
Q. Are these bits suitable for the XY9-60AK station?
A. Hi James, thank you for your question. These will fit XY9-60A and XY9-60D.
09 March 2015 Question by: Rapid Customer
| Product code: 85-0967
Q. Hi, Are these bits made solid through their entire length, or is the piece behind the 'collar' hollow.
A. Hi Mike. Thank you for your question. These pointed soldering bits are solid throughout.
23 December 2014 Question by: Rapid Customer
Q. Would this bit be suitable for 85-6772 Xytronic soldering station ?
A. Hi Steph. Thank you for your question. Yes, this range is listed as suitable for use with 85-6772.
01 May 2014 Question by: Rapid Customer
| Product code: 85-0968
Q. Hi which soldering irons do you stock that use these tips?
A. Hi Chris. Thank you for your question. These soldering bits are suitable for use with the LF-1000 and LF-8000. 85-5147 is the iron for the LF 1000 station.
18 April 2014 Question by: Rapid Customer
| Product code: 85-0968
Q. Hi
Can these bits be used with leaded solder?
A. Hi John. Thank you for your question. The tips can be used with both lead and lead-free solder.
30 October 2013 Question by: Rapid Customer
| Product code: 85-0970
Q. Could you measure the rear section diameter and overall length. I am looking for a 'clone' replacement tip for a Soloman SL-10 iron.
A. Hi Tim. Thank you for your question. The overall length is approximately 55mm with the rear section measuring 28mm (L) x 5.4mm diameter.
28 November 2012 Question by: Rapid Customer
| Product code: 85-0969
Q. could you please let me know the temperature range of this bit
A. Hi Amanda. Thank you for your question. The maximum temperature of this bit is 450 degrees.
08 October 2012 Question by: Rapid Customer
Q. Can you tell me the length from the bottom end to the wide bulge please?
A. Hi Kev, thanks for your question. 28.4mm is the length from the bottom to the bulge.
28 March 2012 Question by: Rapid Customer
| Product code: 85-0969
Q. Can you tell me the diameter of the main body of these bits, please.
A. Hi Philip, the diameter for the main part of the bit (the section that fits into the barrel) is 5.3mm.